Choosing a slicer for your Bambu Lab printer
Bambu Studio is the default; OrcaSlicer is the common Bambu Studio alternative for more tuning. Unlayered Slicer, an OrcaSlicer fork, adds non-planar slicing for stronger parts, wave overhangs and fewer AMS filament swaps on the X1C, P1S, P2S, A1 and A1 Mini. Wireless printing isn't supported yet: export the file and print from microSD.
Fewer swaps on AMS prints
Every AMS color change retracts the old filament, loads the new one, and flushes until the color runs clean. A tall print that changes color every layer can put more filament in the purge chute than in the part. Lower flush volumes cut the cost per swap; Unlayered Slicer cuts the number of swaps by printing in planes. A swap that never happens needs no purge.
Overhangs without supports
Supports are filament printed only to be thrown away. Wave overhangs grow a flat overhang outward from its supported edge, so 90° overhangs print without them. How wave overhangs work.
Supported models
Unlayered Slicer supports A-Series, H-Series, P-Series, and X-Series 3D Printer Models: A1 mini, A1, A2L, H2S, H2D, H2D-Pro, P1P, P1S, P2S, X1C, X2C, and X2E.
Try it on an AMS print
Slice a multicolor model you've printed before and compare the number of filament changes. Free to download.